The La Nordica Extraflame HP Evo combines all the features of larger boilers in a compact structure. Despite being a boiler that is installed in the firebox, Extraflame takes care of the details here too. The sheet-metal casing is carefully painted with a hard-wearing paint.
The firebox door incorporates effective insulation to ensure that heat is not transferred to the casing, but rather that it is directed to the heat exchanger. The tubular heat exchanger ensures excellent heat transfer to the water, which is evident from the high efficiency and the savings on fuel consumption. The tube heat exchangers shall be equipped with turbulators with manual cleaning.
The 12 mm thick cast-iron firebox vessel is equipped with a self-cleaning system. The always clean firebox bowl allows good air flow and consequently maximum combustion of the pellets, while the automatic system reduces the need for manual cleaning.
Ready to connect to central heating
The La Nordica Extraflame HP Evo pellet boiler has a built-in safety thermostat, circulation pump, expansion tank and 3 bar safety valve.
Fast pellet ignition
New progam equipment and a new ceramic spark plug ensure faster ignition, which means less electricity consumption.
Integrated functions and controls
The La Nordica Extraflam HP Evo boiler is equipped with a graphic touch screen for setting and controlling the boiler. A weekly clock is also available to adjust the on and off switches based on demand. As an option, the boiler incorporates the following technologies:
- Auto Clean Checkup: Increases combustion efficiency and, in addition to cleaning the firebox, helps to reduce wear and tear on the firebox parts.
- ChronoThermostat Program: a timer thermostat with temperature control divided into four daily time zones, for best room management.
- Interface Control Temperature: The boiler controller interfaces with the thermostats in the living spaces.
- Digital Pressure Control: A monitoring system to check for any faults in the water pressure.
- Hard Reset Program: In case of faults, it is possible to reset to factory settings.
- Auto Re-Start: The stove can be set to automatically restart in the event of a power failure.
- Electronic Air Control: Allows the control of primary and secondary air for optimum combustion and thermal efficiency.
- Pellet Level Control: Balances the amount of pellets fed into the firebox.